5.0 Rating on 
Maintaining your BMW in tip-top shape means doing regular maintenance which includes changing the coolant fluid. The coolant, which is often referred to as antifreeze, is responsible for maintaining the engine’s temperature by ensuring that it doesn’t overheat or freeze in extreme weather conditions. Over time, coolant might become contaminated and lose its effectiveness; that is why it is important to flush the coolant on a regular basis. Here, we are going to discuss the top reasons why you should flush the coolant of your BMW car.
Pros of Flushing Your BMW’s Coolant
Prevents Engine Overheating
The primary function of coolant is to absorb as well as disperse the heat produced by the engine. When coolant is fed into the engine it absorbs the heat and then releases this heat through the radiator into the surrounding air. If the coolant is old and contaminated, it won’t provide this function perfectly, and the engine may end up overheating. Draining and refilling the coolant system is the best way to keep the fluid clean and lower the chance of overheating.
Protects Against Corrosion
The coolant has anticorrosive and anti-rust additives that protect the engine and cooling system from corrosion and rust. As time passes, some chemicals may get dissolved, and the coolant may turn into an acid which may trigger the corrosion of internal components. Giving your BMW a regular coolant flush is the best thing to do as it removes the old, broken down fluid and replaces it with fresh coolant that contains new additives. This prevents corrosion and extends the service life of the engine and cooling system components.
Improves Heater Performance
In the cold months, the heater in your BMW works by using the coolant to heat the air and supply warmth inside the cabin. If the coolant is dirty or old, it can slash the heating system’s efficiency and provide less-than-adequate heating. By flushing the coolant, you get a better functioning heater which helps in keeping the cabin warm even on the coldest days.
Prohibit Freezing in Cold Weather
The antifreeze in the coolant mixture has a lower freezing point which stops the fluid from freezing when it gets cold. If the coolant is old and the antifreeze property is weakened, the coolant may freeze, causing engine and cooling system damage. Flushing the coolant regularly keeps it from losing its antifreeze properties during winter.
Removes Contaminants
After some time, there is the possibility of accumulation of debris, rust, and other contaminants in the coolant system. These impurities can be deposited in the passages which results in reduced cooling system performance. Flushing out the coolant allows the removal of the contaminants so that the fluid circulates freely and the cycle of the cooling system is uninterrupted.
Prolongs the Life-Time of the Cooling Systems
Routine maintenance that involves coolant changes will take care of your BMW’s cooling system components and help them live longer. When you drain the old coolant from the system and replace it with new fluid, you decrease the odds of harm occurring to the radiator, water pump, hose, and other parts. This in turn stops breakdowns and saves you money on costly repairs in the long run.
DIY or Professional Service?
Anyone can flush the coolant by themselves, but most drivers prefer a professional to do it for them. Flushing the coolant consists of draining the old fluid, running the system with cleaning fluid, and refilling it with new coolant. A professional mechanic is able to do the job right, using the tools needed to remove all the contaminants and fill the system with the required amount of new coolant.
Bring Your BMW To Our Garage For a Quality Coolant Flush
At MotorHaus, we have our garage located in the West Palm Beach area and we also serve drivers that live in the surrounding towns. We have a team of BMW, Mercedes, and MINI specialists that are behind the top quality repair or maintenance we deliver to any type of car that is brought to our workshop.
If you would like to change or flush the coolant in your BMW, you can be sure that our specialists will do an excellent job. We are excited about the opportunity to render you the best services. Call us now at 561-345-2799 and have a chat with our expert mechanics on how we can help you.
